Condensation in and on Your Double Glazing

If you live in the UK you will likely be used to living with some form of condensation in your house, be it in your bathroom after a bath or shower, in your kitchen after cooking or on your windows.

If you regularly indulge in the very first two points above, possibilities are that this is one of, if not, the primary cause for condensation buildup on your windows (together with a couple of other things) and most of the times this can be easily treated by following some basic actions:

  • During cooking, make certain that all pans and pots are covered with a lid and open a window close to your cooking location
  • If you have a hood extractor over your cooker, use it as this will assist to shift any wet air outside
  • When bathing or showering, again, open a window and utilize an extractor fan if you have one
  • Avoid drying any fabrics inside your house As they dry, the wet air will be released into your home.
  • Utilize your heating system to maintain a consistent and stable temperature level to ensure surface areas are kept warm, reducing the possibility of condensation
  • Open your windows for at least an hour a day as this will permit clean air in to replace the warm moist air in your spaces
  • Where condensation does form, wipe it off as soon as possible to lower the threat of it evaporating back in the air
  • These are some standard steps to require to a minimum of minimize the threat of condensation, not simply on your windows but also within your home as a whole. If moisture is kept to a minimum and your surface areas are kept at a continuous temperature this should go quite a method to decreasing any condensation accumulation dangers.

If nevertheless the majority of your condensation issues exit in, on or around your windows then this might be an indication that this is where the concern lies.

Condensation In, On and Around Windows
When dealing with your double glazed systems, condensation normally forms in among 3 locations:

  • On internal glazed faces
  • On external glazed faces
  • In-between glazed areas of the sealed double glazed system

Fixing Condensation Internally

As we have actually talked about above, if you primary issue is wetness on the internal locations of your glazing, attempt to lower the quantity of wetness that is present in your house by routinely opening doors and windows and allowing fresh air to replace stale, moisture-laden air, cook and shower with windows open and extractor fans on if you have them (if not, think about getting them fitted), dry clothing outside and so on …

By doing this you must see an extreme reduction in moisture accumulation, maybe not clearing it all totally however definitely decreasing it to a more manageable level.

After taking our recommended steps and you see no or really little difference, this might be a sign that your double-glazing is not what it when was and is now permitting the cold air outside to lower the temperature level of the inner glass pane, developing perfect conditions for condensation.

If this is the case there is really extremely little you can do aside from replace the sealed system (glazed area) and frame and although this sounds costly (in reality it is), it might not just treat your condensation problems however assist to save on your heating expenses!

This particular concern is actually rather unusual and remains in a lot of cases a good thing! This is an indication that your windows are well thermally insulated. In failing or poor quality systems, thermal transfer takes place where heat from the internal pane takes a trip throughout the air gap and heats the external pane.

Where the heat transfer procedure is avoided from happening due to the thermal qualities of the sealed unit, wetness can condense causing condensation.

Although this can be rather bothersome as it undoubtedly obscures your vision out of the window, it’s a great problem to have and a sign that your windows are in good condition and preventing excessive heat loss.

Fixing Condensation Between Glazed Units

There is generally only one reason for condensation and wetness in between glazing and this is that the seal that seals the two glass panes has actually stopped working.

Occasionally there can be other causes such as uncommonly cold or humid weather, high presence of wetness from fresh paint, plaster or large scale building and construction work to the property or that the base of the frame is filled with water and with time this will gradually seep in, but in basically all cases it’s down to the sealed system itself failing.

At this point you actually just have 2 choices:

  • Get the defective sealed system changed with brand-new
  • Get the unit repaired

Prior to and after sealed unit repair– Image courtesy of
The repair work process normally goes something like this– A little hole is drilled in either one or both of the panes or in the spacer bar. An unique drying representative is then pumped or injected into the unit drying it out and then it is cleaned up and resealed.

Different companies will use various strategies and techniques to attain the repair work however in essence the moisture is gotten rid of and the system resealed.

Post Sponsored by

Leave a Reply

Your email address will not be published. Required fields are marked *