Advice on Damp, Leaks and Condensation Issues in the Home

When it’s pouring down outside, there’s no better place to be than in your own home, warm and dry. What are you going to do when your home starts to let water in? Water in your home can trigger wet, mould, and even wet rot. Condensation and damp can be brought on by a variety of factors: drying out damp clothes, showers, kettles, and even our breath, and if it’s left unattended, it could cause structural issues to your structure.

What is Condensation?
Condensation can form when there’s a distinction between temperature levels inside and outside, and enough humidity in the air. This will cause damp and mould, and will definitely rot your window frames. Thankfully, condensation is easy to deal with. Simply wipe it down with a cloth, and simply wash it down the drain. If the condensation still persists, attempt covering your pots whilst cooking, not letting the kettle boil as long, keep the room well-ventilated, and in some extreme cases, you may need to use a dehumidifier. But do deal with condensation the minute you find it, because if you do not, it will develop into mould.

What is Mould?
Mould is a fungus that prospers in damp conditions. Wash down all the infected location with a Health and Safety Executive-approved fungicidal wash. When you’ve cleared all the mould and you’ve left it to dry out, remodel if essential using a fungicidal paint and wallpaper paste. Attempt to keep the space well-ventilated at all times with air bricks, or even leaving the window open.

Whether it’s increasing wet or penetrating damp it can cause major structural problems to your house, and if it’s left ignored, it can perish your plasterwork, damage your paintwork, and even ceilings can come collapsing down. Damp is easy to spot– it leaves tide marks, it’s dark, it’s cold to touch, and it is available in two types.

Penetrating moist: that’s when you in the wall or the ceiling, which will let the rain water be available in. It can even be available in from gutters and downspouts, and even rubbish left outside, piled up against the wall– that can assist penetrating damp draw its method through the brickwork.

The other one is rising moist– that’s when you have not got an enough DPC (which is a Damp-Proof Course) in the brickwork to stop water level of the ground penetrating its method through.

If it’s penetrating moist, you may have the ability to solve this yourself– find out where the water’s originating from, fix it, dry it out using a dehumidifier if you’ve got one, and after that re-plaster if required and finish with the paintwork. If you do think you’ve got rising wet, you should not try to tackle this yourself: your whole home might need a brand-new Damp-Proof Course. You’re going to require to use a certified professional because left untreated, it could lead to yet another issue.

If damp or wetness enters your woodwork, it can cause wet rot. Wet rot is a fungus that enters wet wood. It begins to deteriorate it from the inside out, it offers a dark wet look with cracks in the timber. Although it’s not as severe as dry rot, it can do major damage to your timbers, but you need to be able to treat it yourself.


Fixing the Damage Caused by Damp, Rot and Condensation
Firstly you require to develop where the water’s being available in, and then, obviously, handle it. Then you require to learn which lumbers are rotten and need replacing. You can do this by getting yourself a sharp tool like a bradawl, merely pressing it through the wood, and if you discover it goes all the way through quite easy, you know that it’s completely decomposed– it needs to be changed with brand-new. Keep in mind, as soon as you’ve eliminated all your rotten wood, you require to deal with the area with a damp rot fungicide, covering all the areas where the fungi could be hiding prior to you use any brand-new wood.

If you want to stop your problems with moist turning up again, then always ensure your roofing system is effectively preserved, that there aren’t any cracks in your walls, and that nothing that might be collecting water is accumulated against your external walls. And keep spaces that are prone to condensation well-ventilated, and always resolve an issue the minute you discover it, because they won’t improve on their own.

Post Sponsored by Glass Repairs Hayes – Local Glazier in Hayes.

Leave a Reply

Your email address will not be published. Required fields are marked *